Render Target: SSR
Render Timestamp:
3/31/2025, 12:58:48 AM EDT
3/31/2025, 4:58:48 AM UTC
Commit: 461ca8d8fe5b1efd4c01fc87e5b5eb592e2d154a
Cell Signaling Technology Logo

Basket Updated

0

Items added

View Featured Offers >>
1% for the planet logo

Fluorescent Western

For western blots, incubate membrane with diluted primary antibody in 5% w/v BSA, 1X TBS, 0.1% Tween® 20 at 4°C with gentle shaking, overnight.

NOTE: Two-color western blots require primary antibodies from different species and appropriate secondary antibodies labeled with different dyes. Overlap of epitopes may cause interference and should be considered in two color western blots. If the primary antibodies require different primary antibody incubation buffers, test each primary individually in both buffers to determine the optimal one for the dual-labeling experiment.

A. Solutions and Reagents

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. 20X Phosphate Buffered Saline (PBS): (#9808) To prepare 1 L 1X PBS: add 50 ml 20X PBS to 950 ml dH2O, mix.
  2. 10X Tris Buffered Saline (TBS): (#12498) To prepare 1 L 1X TBS: add 100 ml 10X TBS to 900 ml dH2O, mix.
  3. 1X SDS Sample Buffer: Blue Loading Pack (#7722) or Red Loading Pack (#7723) Prepare fresh 3X reducing loading buffer by adding 1/10 volume 30X DTT to 1 volume of 3X SDS loading buffer. Dilute to 1X with dH2O.
  4. 10X Tris-Glycine SDS Running Buffer: (#4050) To prepare 1 L 1X running buffer: add 100 ml 10X running buffer 900 ml dH2O, mix.
  5. 10X Tris-Glycine Transfer Buffer: (#12539) To prepare 1 L 1X Transfer Buffer: add 100 ml 10X Transfer Buffer 200 ml methanol + 700 ml dH2O, mix.
  6. 10X Tris Buffered Saline with Tween® 20 (TBST-10X): (#9997) To prepare 1 L 1X TBST: add 100 ml 10X TBST to 900 ml dH2O, mix.
  7. Nonfat Dry Milk: (#9999).
  8. Blocking Buffer: 1X TBS with 5% w/v nonfat dry milk; for 150 ml, add 7.5 g nonfat dry milk to 150 ml 1X TBS and mix well. Tween® 20 should not be present in the Blocking Buffer because it is auto-fluorescent and increases non-specific background. After the blocking step, Tween® 20 can be reintroduced to subsequent diluent buffers.
  9. Wash Buffer: 1X TBST.
  10. Bovine Serum Albumin (BSA): (#9998).
  11. Primary Antibody Dilution Buffer: 1X TBST with 5% BSA; for 20 ml, add 1.0 g BSA to 20 ml 1X TBST and mix well.

  12. Secondary Antibody Dilution Buffer: 1X TBS, 0.1% Tween-20 with 5% nonfat dry milk; for 20 ml, add 2 ml 10X TBS to 18 ml water, mix. Add 1.0 g nonfat dry milk and mix well. While stirring, add 20 µl Tween-20 (100%).

    Recommended Anti-Rabbit secondary antibodies:

  13. Blue Prestained Protein Marker, Broad Range (11-250 kDa): (#59329).
  14. Blotting Membrane and Paper: (#12369) This protocol has been optimized for nitrocellulose membranes (recommended). Pore size 0.2 µm is generally recommended.

B. Protein Blotting

A general protocol for sample preparation.

  1. Treat cells by adding fresh media containing regulator for desired time.
  2. Aspirate media from cultures; wash cells with cold 1X PBS; aspirate.
  3. Lyse cells by adding 1X SDS sample buffer (100 µl per well of 6-well plate or 500 µl per plate of 10 cm diameter plate). Immediately scrape the cells off the plate and transfer the extract to a microcentrifuge tube. Keep on ice.
  4. Sonicate for 10–15 sec to complete cell lysis and shear DNA (to reduce sample viscosity).
  5. Heat a 20 µl sample to 95–100°C for 5 min; cool on ice.
  6. Microcentrifuge for 5 min.

  7. Load 20 µl onto SDS-PAGE gel (10 cm x 10 cm).

    NOTE: Loading of prestained molecular weight markers (#59329, 10 µl/lane) to verify electrotransfer and biotinylated protein ladder (#7727, 10 µl/lane) to determine molecular weights are recommended.

  8. Electrotransfer to nitrocellulose membrane (#12369).

C. Membrane Blocking and Antibody Incubations

NOTE: Volumes are for 10 cm x 10 cm (100 cm2) of membrane; for different sized membranes, adjust volumes accordingly.

  1. (Optional) After transfer, wash nitrocellulose membrane with 25 ml TBS for 5 min at room temperature.

  2. Incubate membrane in 25 ml of blocking buffer for 1 hr at room temperature.

    CRITICAL STEP: Do not include Tween® 20 in blocking buffer (Section A, Step 8).

  3. Wash three times for 5 min each with 15 ml of TBST.
  4. Incubate membrane and primary antibody (at the appropriate dilution as recommended in the product product webpage) in 10 ml primary antibody dilution buffer with gentle agitation overnight at 4°C.
  5. Wash three times for 5 min each with 15 ml of TBST.
  6. Incubate membrane with fluorophore-conjugated secondary antibody (#5366, #5151) (1:5000–1:25,000 dilution of 1 mg/ml stock) in 10 ml of secondary antibody dilution buffer with gentle agitation for 1 hr at room temperature.
  7. Wash three times for 5 min each with 15 ml of TBST.

D. Detection of Proteins

  1. Drain membrane of excess TBST and allow to dry.

    CRITICAL STEP: Membrane must be dry for fluorescent staining.

  2. Scan membrane using an appropriate fluorescent scanner following the manufacturer’s recommendations.

posted May 2008

revised June 2020